The Heritage Classic Ruger stock from Revolution Stocks embodies all the gracefull design elements found in classic rifle stocks costing far more, yet it subtly balances those elements for the variety of applications it will serve. The comb is parallel to the bore for smooth sighting and to aid scope use. The cheekpiece adds facial support and grace to your new Ruger M77 replacement stock. This Ruger M77 MKII stock (M77 Hawkeyee stock) is complete with a 3/4" vented recoil pad and a semigloss weather resistant finish.
*If you have a Tang Safety, unfortunately, our M77 stocks will not fit. Tang Safetys are located behind the bolt, on top of the rifle as opposed to the side, and look like a small flap of metal. See here for a side-by-side comparison of safetys.
Available Upgrades for Ruger M77 MKII Stock:
For more information on this Ruger riflestock, please see the Ruger M77 gunstock page.
Posted by Unknown on 29th Dec 2014
Fit like a glove. A minor fitting of the action then dropped right in.
Posted by Unknown on 24th Feb 2014
I purchased this M77 MKII stock in purple haze. The color and finish look good. The fit was prefect for my ruger 243 short action. the barrel was full free floating, as should be. After assembly I notice that the the forearm is rather slick to hold, I feel that some checkering would give a better grip. With that said, maybe checkering could be offered as an add on?
Posted by Anthony in AZ on 6th Feb 2014
I recently purchased this M77 Heritage stock in "Woodland Camo" satin finish. It was a difficult choice to make between this and Cayenne. When my stock arrived I was very pleased with the color, but when I installed my stainless steel barrel and action I was absolutley amazed at the result in both fit and finish. I immediately texted photos to all my buddies. The grey color in this stock really accents the stainless barrel which fits it like a glove. Some minor clearancing and I will be all set. Really impressive.
Posted by Ric Gleason on 27th Sep 2013
I recently acquired the Ruger Hawkeye Laminate SA stock. From ordering through receiving, everything went very well. The stock arrived before I expected, and was immediately inspected. It was flawless. The recoil pad, studs and inletting were perfect and installation was a breeze. My only "concern" (and the reason for 4 vs. 5 stars) is that checkering was absent. I guess I did not realize that it was not included. It will be slick when wet but I'll manage! If it's too much of an issue, I'll send it out somewhere to be checkered. Overall though, the stock is VERY NICELY DONE!
Posted by David Wolfe on 14th Sep 2012
I just bought your buckskin brown stock...
It took a hammer, a chisel and a chain saw but I got it on there.. Just kidding..!!
The shock comes from the fact that it fit like a glove with no hassle at all..!! The important part is that it solved my problem. I'd bought a .308 Ruger rifle several years ago with a plastic camo stock.. The gun wouldn't group.. I tried all sorts of different bullets, powders, casings and scopes..
I had noticed the Ruger flimsy stock could be a problem so my last resort was to try one of your stocks.. I've never replaced a stock before to solve a problem like this so I was unsure it would work...But it did.. I'm getting consistent 1/2" groups now.. AMAZING.!!
One small issue that I don't believe to be the fault of your stock is the magazine cover actually closed flush against your stock. With the Ruger stock there was a large air gap so the latch in front of the trigger guard had no problem catching the magazine door.
Just touched the tip on the magazine door with a dremel tool and that problem was solved..
My final decision to buy a stock on this site was based on Ron Sumner's review..
Posted by Ron Sumner on 30th Jul 2012
The stock and barreled action fit together nicely. The finish and recoil pad were perfect. Very nice product, I could not be more pleased.
All prices are in USD.