Our Savage stocks are inletted in a way that will accept either accu-trigger or non-accu trigger actions. The Model 110 is a Long Action, and is for Blind Mag. The action is held down with two (2) takedown screws. There is one through the trigger guard and one through the escutcheon. The back of the trigger guard is held down with a small wood screw (which will come off of the factory stock). We have drilled a pilot hole for this screw.
Measurement between takedown screws:
LA - 5 1/16"
SA - 4 3/8"
Due to changes that Savage has made over the years, you may have either a long front takedown screw or a short take down screw. The older style screws are longer - around 1 1/4". The newer style screws are shorter - around 1 1/16". The escutcheons in our stocks are made for the newer style short screw. If you have the longer screw, you will need to insert the spacer, which has been provided with the stock, into the escutcheon before assembling the action. If you have the short screw, there is no need to use the spacer.
The Heritage Classic Savage 10 stock & Savage 110 stock from Revolution Stocks embodies all the graceful design elements found in classic rifle stocks costing far more, yet it subtly balances those elements for the variety of applications it will serve. The slender, somewhat open grip on this Savage stock is well defined, but does not extend too far below the toe line. The comb is parallel to the bore for smooth sighting and to aid scope use. The cheekpiece adds facial support and grace to your new Savage replacement stock. The stock's flat/oval forend and inletting fits a wide range of rifles.
The Tundra is a Sporter style thumbhole stock that is great for the woods or the range. The Tundra features a rollover cheek piece and a semi-flat forend for greater stability when shooting from a rest. This exciting drop-in gunstock is complete with a rubber buttplate and a semigloss weather resistant finish.